Milan Hazel

Width 24" | Height 30" | Depth 30"

2 door base cabinet with (1) 18" deep adjustable shelves and 1 drawer. Black, adjustable, plastic furniture feet will also be included which will add 3-3/4" to 5-3/8" to the 30" height.

Width 3/4" | Height 34-1/2" | Depth 24-7/8"

Base end panel that is finished on two sides and edge-banded on all four edges.

Width 3" | Height 84" | Depth 24-7/8"

Tall column that can be trimmed on site if needed. The sides will be flush and finished, and the back will be unfinished.

Width 3" | Height 90" | Depth 24-7/8"

Tall column that can be trimmed on site if needed. The sides will be flush and finished, and the back will be unfinished.

Width 3" | Height 96" | Depth 24-7/8"

Tall column that can be trimmed on site if needed. The sides will be flush and finished, and the back will be unfinished.

Width 3" | Height 34-1/2" | Depth 24-7/8"

Base column that can be trimmed on site if needed. The sides will be flush and finished, and the back will be unfinished.

Width 3" | Height 34-1/2" | Depth 24-7/8"

Appliance end panel with a 3" return which consists of a filler interlocked with a 1/2" plywood return panel. The exposed sides will have near-flush finished ends. The front can be trimmed down to 1" wide if necessary (edge banding may be needed in order to finish the cut edge). The sides will be flush and finished and all four edges are edge-banded.

Width 6" | Height 34-1/2" | Depth 24-7/8"

Appliance end panel with a 3" return which consists of a filler interlocked with a 1/2" plywood return panel. The exposed sides will have near-flush finished ends. The front can be trimmed down to 1" wide if necessary (edge banding may be needed in order to finish the cut edge). The sides will be flush and finished and all four edges are edge-banded.

Width 24" | Height 85-1/2" | Depth 30"

Double oven cabinet with two 17-7/8" high doors on top and one 11-7/16" high drawer on bottom (height is drawer front height). The oven cabinet has a full panel that will need to be cut on site, the maximum cutout is 28"W x 55"H. When using two appliances, it is recommended to provide support for the top appliance; PLY-3/4 can be used and would need to be purchased separately, and then installed on site. Black, adjustable, plastic furniture feet will also be included which will add 3-3/4" to 5-3/8" to the 85-1/2" height.