Milan Cafe

Width 3" | Height 96" | Depth 24-7/8"

Tall column that can be trimmed on site if needed. The sides will be flush and finished, and the back will be unfinished.

Width 13-7/8" | Height 96" | Depth 3"

Refrigerator end panel that is finished on both sides and edgebanded on all edges. The panel has a 3" filler attached to the front which will be flush with the sides.

Width 25-7/8" | Height 96" | Depth 3"

Refrigerator end panel that is finished on both sides and edgebanded on all edges. The panel has a 3" filler attached to the front which will be flush with the sides.

Width 24-7/8" | Height 96" | Depth 3/4"

Refrigerator end panel that is finished on both sides and edgebanded on all edges.

Width 30" | Height 96" | Depth 3"

Refrigerator end panel that is finished on both sides and edgebanded on all edges. The panel has a 3" filler attached to the front which will be flush with the sides.

Width 30" | Height 96" | Depth 3/4"

Refrigerator end panel that is finished on both sides and edgebanded on all edges.

Width 3" | Height 96" | Depth 3/4"

Tall filler that will be finished on two sides and edge-banded on all four edges.

Width 6" | Height 96" | Depth 3/4"

Tall filler that will be finished on two sides and edge-banded on all four edges.

Width 18" | Height 60" | Depth 15"

Wall cabinet with (1) 6-3/4" drawer on bottom (drawer front height) and (1) 53" high door on top. There will be 3 adjustable shelves on the top of the cabinet. The exposed sides have near-flush ends and are unfinished, wainscot panels can be ordered to finish exposed sides. **Note this cabinet has a 15" depth**

Width 24" | Height 60" | Depth 15"

Wall cabinet with (1) 6-3/4" drawer on bottom (drawer front height) and (2) 53" high doors on top. There will be 3 adjustable shelves on the top of the cabinet. The exposed sides have near-flush ends and are unfinished, wainscot panels can be ordered to finish exposed sides. **Note this cabinet has a 15" depth**

Width 15-7/8" | Height 60" | Depth 3/4"

Wainscot wall panel, to be used on the exposed side of a 60" high wall cabinet with drawers, with a depth of 15". Wainscot panels will always be shipped loose and will need to be installed on site. The panel is deep enough to cover the side of the door, giving the door a built in look.