Milan Cafe

Width 96" | Height 4-1/2" | Depth 3/4"

Base board molding that is edge banded on all 4 edges.

Width 96" | Height 1-1/2" | Depth 3/4"

Light rail molding that must be used with the starter molding (STRM-8) to be flush with the front of the cabinet doors.

Width 96" | Height 3/4" | Depth 1-1/2"

Starter molding that is installed above wall and tall cabinets which acts as a cleat for light rail molding (SKU: LRM), to make it easier to mount moldings on top of the cabinets. The starter molding and molding extension are ideal to use when mounting crown molding all the way to the ceiling. It can also be used with the straigh valance (SKU: VST-6) for a Soffit build up.

Width 96" | Height 4-1/2" | Depth 3/4"

Toe kick.

Width 21-7/8" | Height 34-1/2" | Depth 3/4"

Vanity base end panel that is finished on two sides and edge-banded on all four edges.

Width 96" | Height 6" | Depth 3/4"

Straight valance that can be used with the starter molding (SKU: STRM-8) for a Soffit build-up.

Width 21-7/8" | Height 29-7/8" | Depth 3/4"

Wainscot wall panel, to be used on the exposed side of a 30" high wall microwave cabinet with a 21" depth. It will match the door style of the cabinets being ordered. Wainscot panels will always be shipped loose and will need to be installed on site. The panel is deep enough to cover the side of the door, giving the door a built in look.

Width 21-7/8" | Height 35-7/8" | Depth 3/4"

Wainscot wall panel, to be used on the exposed side of a 36" high wall microwave cabinet with a 21" depth. It will match the door style of the cabinets being ordered. Wainscot panels will always be shipped loose and will need to be installed on site. The panel is deep enough to cover the side of the door, giving the door a built in look.

Width 21-7/8" | Height 41-7/8" | Depth 3/4"

Wainscot wall panel, to be used on the exposed side of a 42" high wall microwave cabinet with a 21" depth. It will match the door style of the cabinets being ordered. Wainscot panels will always be shipped loose and will need to be installed on site. The panel is deep enough to cover the side of the door, giving the door a built in look.

Width 21-7/8" | Height 29-7/8" | Depth 3/4"

Wainscot vanity base panel, to be used on the exposed side of a vanity base cabinet. It will match the door style of the cabinets being ordered. Wainscot panels will always be shipped loose and will need to be installed on site. The panel is deep enough to cover the side of the door, giving the door a built in look.