Artisan Walnut Shaker

Width 48" | Height 34.5" | Depth 0.25"

Beaded board panel with glazing. Commonly used to give a beaded finished look.

Width 48" | Height 36" | Depth .25"

Finished back panel. Commonly used to finish the back of an island. Grain will run vertically (along the height) and the panel will be finished on one side.

Width 48" | Height 34.5" | Depth 21"

Bathroom vanity that has 4 doors, 1 drawer on far left, 1 drawer on far right, and a fake drawer front in the middle. There will be no shelves with this cabinet.

Width 0.25" | Height 0.75" | Depth 96"

Outside corner molding that comes in an 8 foot strip. Commonly used to finish edges on islands or other areas.

Width .25" | Height .75" | Depth 96"

Batten molding that comes in an 8 foot strip.

Width 0.25" | Height 4.5" | Depth 96"

Toe kick that comes in an 8 foot strip. Only the front will be finished, the back, top, bottom, and sides are all unfinished.

Width 48" | Height 6" | Depth

Valance that can be trimmed up to 6" on either side.

Width 48" | Height 6" | Depth

Valance that can be trimmed up to 6" on either side.

Width 48" | Height 34.5" | Depth .25"

Bead board panel with matching graining. Commonly used to give a beaded finished look.

Width 48" | Height 36" | Depth .25"

Finished back panel with matching graining. Commonly used to finish the back of an island. Grain will run vertically (along the height) and the panel will be finished on one side.

Width 48" | Height 96" | Depth .25"

Finished back panel with matching graining. Commonly used to finish the back of an island.

Width .25" | Height 4.5" | Depth 96"

Toe kick that comes in an 8' strip with matching graining. Only the front will be finished, the back, top, bottom, and sides are all unfinished.