Under Cabinet Lighting

Width 7-3/8" | Height 5/8" | Depth 10-5/8"

Width 10-3/8" | Height 5/8" | Depth 10-5/8"

Width 13-3/8" | Height 5/8" | Depth 10-5/8"

Width 16-3/8" | Height 5/8" | Depth 10-5/8"

Width 19-3/8" | Height 5/8" | Depth 10-5/8"

Width 22-3/8" | Height 5/8" | Depth 10-5/8"

Width 22-5/8" | Height 5/8" | Depth 22-5/8"

Width 16-3/8" | Height 5/8" | Depth 10-5/8"

Width 25-3/8" | Height 5/8" | Depth 10-5/8"

Width 28-3/8" | Height 5/8" | Depth 10-5/8"

Width 31-3/8" | Height 5/8" | Depth 10-5/8"

Width 34-3/8" | Height 5/8" | Depth 10-5/8"

Width 37-3/8" | Height 5/8" | Depth 10-5/8"

Width 40-3/8" | Height 5/8" | Depth 10-5/8"

Width 43-3/8" | Height 5/8" | Depth 10-5/8"

Width 46-3/8" | Height 5/8" | Depth 10-5/8"

Tune and Dim your lights right on the control hub to set your lighting just right. Use the pair button to connect to wifi or pair with a new switch. The hub will also remember the settings if it loses power. Power hub for up to 200" of light panels (ex: a panel for an 18" cabinet will use 18" in width, a corner panel will use 36"). A power hub will be required for the light panels and are normally put inside one of the cabinets, then a cord will be run through the bottom of the cabinet into one of the light panels. If, for some reason, the power supply will be more than 12" away from the light panel it's being connected to, additional connector wires will need to be used.

Tune and Dim your lights right on the control hub to set your lighting just right. Use the pair button to connect to wifi or pair with a new switch. The hub will also remember the settings if it loses power. Power hub for up to 400" of light panels (ex: a panel for an 18" cabinet will use 18" in width, a corner panel will use 36"). A power hub will be required for the light panels and are normally put inside one of the cabinets, then a cord will be run through the bottom of the cabinet into one of the light panels. If, for some reason, the power supply will be more than 12" away from the light panel it's being connected to, additional connector wires will need to be used.

Width 1-1/2" | Height 4-1/4" | Depth 5/8"

Width 1-3/4" | Height 4-1/4" | Depth 5/8"

Width 2-3/4" | Height 4-1/2"

For a minimalist, sleek appearance, this mini LED strip casts a well-distributed light without a light rail or valance. Mounting directly to the cabinet bottom, it is the ultimate light/life balance.

48" x 3/8" LED strip for cove lighting, odd sized areas or special projects. The strip is cuttable every 1-1/2" so is easy to adjust for any project. Color Rendering Index (CRI) in excess of 90. 240 lumens per foot, rated to 50,000 hours. Mounts with 3M tape. The light ranges from 2200K-5500K (cool to warm white) and is adjustable and dimmable using the switch, the wifi controlled app and/or smart home devices.

96" x 3/8" LED strip for cove lighting, odd sized areas or special projects. The strip is cuttable every 1-1/2" so is easy to adjust for any project. Color Rendering Index (CRI) in excess of 90. 240 lumens per foot, rated to 50,000 hours. Mounts with 3M tape. The light ranges from 2200K-5500K (cool to warm white) and is adjustable and dimmable using the switch, the wifi controlled app and/or smart home devices.

192" x 3/8" LED strip for cove lighting, odd sized areas or special projects. The strip is cuttable every 1-1/2" so is easy to adjust for any project. Color Rendering Index (CRI) in excess of 90. 240 lumens per foot, rated to 50,000 hours. Mounts with 3M tape. The light ranges from 2200K-5500K (cool to warm white) and is adjustable and dimmable using the switch, the wifi controlled app and/or smart home devices.

For a minimalist, sleek appearance, this Waterproof Tunable LED strip casts a well-distributed light without a light rail or valance. Mounting directly to the cabinet bottom, it is the ultimate light/life balance.

Width 40" | Diameter 1/4" | End 1/2"

Width 60" | Diameter 1/4" | End 1/2"

Width 80" | Diameter 1/4" | End 1/2"

Width 100" | Diameter 1/4" | End 1/2"

Width 120" | Diameter 1/4" | End 1/2"

Pigtail connector, only required for hardwire connections (to connect the lights to the hardwire).

3 way splitter extension cord used to connect more than one group of lights.

Male to male connector to connect 2 extension cords, in the event that a longer extension cord is needed.